If you are outside USA and purchase a JBQ lifting kit, it is often possible to add other smaller products at the USA prices as the added weight usually will not surpass the max weight of the overseas shipping price. Please inquire if this is of interest.

 

 

Thunderbird LT & Commander Lifting Bracket – STD   

{JBQ-LT-STD} 

jbq-lt-stdjbq-lt-fr1

JBQ-LT-STD allows you to safely and quickly lift your LT & Commander for routine cleaning & maintenance with a standard motorcycle jack or scissor type jack in rear and a scissor type jack in the front.

Fits all Triumph Thunderbird LT & Commander. 

USA $205, Canada $240, Europe $260, Australia/NZ $270
PLEASE CONTACT US FOR PRICING TO OTHER COUNTRIES

Priority shipping included in price.

Purchase Now


Thunderbird LT & Commander Lifting Bracket           

High Profile – NON-USA)

{JBQ-LT-HP-INTL}

Fits Triumph Thunderbird LT & Commander – (Non-USA Models & USA models that have had the charcoal canister removed) 

Works like the STD, but fits 1.75″ higher in frame than STD rear bracket for even more visual discretion. Includes jacking adapter. jbq-lt-hp-intl

USA $235, Canada $270, Europe $290, Australia/NZ $300
PLEASE CONTACT US FOR PRICING TO OTHER COUNTRIES

Priority shipping included in price.

Purchase Now

 

Thunderbird LT & Commander Lifting Bracket    

High Profile – U.S.A. models & others with charcoal canister.

{JBQ-LT-HP-USA}

New for the Thunderbird LT & Commander is the  Jack-Be-Quick High Profile lifting kit (JBQ-LT-HP-USA). This kit has a relocating bracket for the charcoal canister that is fitted to USA models and perhaps some other country’s models as well, along with the required hardware. Most other countries do not have the charcoal canister, so if your bike does not, and you’d still prefer the higher profile look to the STD, you should select the JBQ-LT-HP-INTL. If you are unsure, please refer to the installation instructions for a photo.

Both High profile JBQs fit 1.75″ (44.5MM) higher in the frame for even more visual discretion; virtually out of sight. Both come with the required adapter that fits between the JBQ and your jack so the weight of the bike is on JBQ, not the sump or exhaust pipes.

jbq-lt-hp-usa

 USA $252, Canada $287, Europe $307, Australia/NZ $317
PLEASE CONTACT US FOR PRICING TO OTHER COUNTRIES

Priority shipping included in price.

Purchase Now


Handlebar Spacers

1.25″+- height, 1.75″ diameter 

    

3-lt-cmdr-spacers-1-75x1-25-with-100mm-bolts

$95 USA; $105 Canada; $110 for Europe, Australia & NZ. Includes  shipping and 100 MM bolts.
PLEASE CONTACT US FOR PRICING TO OTHER COUNTRIES

Purchase Now


Gearingo Gear Indicator for 1.25″ handlebars.

    JBQ is now offering the new “Gearingo” Gear Position Indicator. Unlike inferior indicators, with Gearingo your bike does not have to be in motion to display the gear selected. This comes into play when you make a sudden stop from high speed without the opportunity to downshift through all the gears. GIPro and others will not display the gear since it needs to compare RPM with the bike’s speed. Gearingo does since it gets it’s reading directly from the Gear Position Sensor that is built into the bike’s starting circuit; no movement is necessary. Gearingo is also able to display ambient temperature and available voltage. Others do not offer that feature. Gearingo is machined from aircraft quality aluminum and has a bright red LCD display plainly visible in daylight, yet not too bright for night riding. Gearingo will work with all modern Triumphs that have an OBDII connector and a gear position sensor. If you are unsure if your bike has a gear position sensor, please contact your local dealer’s parts department. Be prepared with your VIN.

Gearingo is $149 within the USA, and as usual, includes shipping.

Please contact us for where to purchase within Canada.

Please contact us for pricing to other countries.

Details

 gearingo-below-handlebar-mount-2gearingo-1

gearingo-2gearingo-above-handlebar-mount


Front & Rear Axle Drivers

Front-&-rear-axle-drivers-1

The Jack-Be-Quick front and rear axle drivers fits all Hinckley Triumphs with 25 MM front axles and 19 MM rear axles. They are machined specifically to fit your Triumph from 6061 aluminum so as not to damage your axles.

Details


Bearing Drivers

Bearing-driver-2

The Jack-Be-Quick Bearing Driver installs your new bearings & seals. Notice the machined relief in the face of the bearing driver. It is designed to apply load only to the outer portion of the bearing, not the balls, avoiding the damage that can result from using sockets. It is machined specifically to fit your Triumph from 6061 aluminum so as not to damage your bearings or races.

Bearing driver with adapter 4

DetailsJBQ-Bearing-driver9